APC Smart-UPS X 750 Rack/Tower LCD smx750i
APC Smart-UPS X 750VA Rack/Tower LCD 230V

Green mode
High frequency design
Energy meter
Intuitive LCD interface
Auto recognition of external batteries
Multiple switched outlet groups
Pure sine wave output on battery
Scalable run time
Cold-start capable
Plug-and-Play external batteries
Rack / tower convertible
SmartSlot
Temperature-compensated battery charging
Intelligent battery management
Power conditioning
Automatic restart of loads after UPS shutdown
Disconnected battery notification
Network manageable
Audible alarms
Serial connectivity
Hot-swappable batteries
Predictive failure notification
Resettable circuit breakers
Battery failure notification

APC Smart-UPS X 750 Rack/Tower LCD - UPS - 600 Watt - 750 VA
Device TypeUPS - rack-mountable
Rack Size2U
Weight22.1 kg
Input VoltageAC 230 V
Output VoltageAC 230 V ± 5%
Power Capacity600 Watt / 750 VA
Input ConnectorsPower IEC 60320 C14
Output connectors8 x power IEC 60320 C13
BatteryLead Acid
Run Time (Up To)14.2 min at full load
ColourBlack
Dimensions (WxDxH)8.9 cm x 49 cm x 43.2 cm
Manufacturer Warranty3-year warranty

EPO
Attach the device to an emergency power off (EPO) system so that power can be turned off in an emergency situation.
Green mode
Green mode bypasses unused electrical components in good power conditions to achieve very high operating efficiency without sacrificing any protection.
High frequency design
Reduces or eliminates bulky transformers resulting in lighter units for ease of handling.
Energy meter
Provides actual kilowatt hours of usage for energy conscious users.
Intuitive LCD interface
Provides clear and accurate information with the ability to configure the UPS locally with easy to use navigation keys.
Auto recognition of external batteries
UPS recognizes when external battery packs are attached and automatically adjusts runtime.
Multiple switched outlet groups
Multiple outlet groups that may be controlled separately from the UPS for discrete reboot of hung devices, sequenced on / off and non-critical load shedding.
Pure sine wave output on battery
Simulates utility power to provide a high degree of compatibility for active PFC (power factor corrected) servers and sensitive electronics.
Scalable run time
Scalable run time allows additional run time to be quickly added as needed.
Cold-start capable
Provides temporary battery power when the utility power is out.
Plug-and-Play external batteries
Ensure clean, uninterrupted power to the loads when adding extra runtime to the UPS.
Rack / tower convertible
Protects the initial investment in the UPS when migrating from tower to rack-mount environment.
SmartSlot
Customize UPS capabilities with management cards.
Temperature-compensated battery charging
Prolongs battery life by regulating the charge voltage according to battery temperature.
Intelligent battery management
Maximizes battery performance, life, and reliability through intelligent, precision charging.
Power conditioning
Protects connected loads from surges, spikes, lightning, and other power disturbances.
Automatic restart of loads after UPS shutdown
Automatically starts up the connected equipment upon the return of utility power.
Disconnected battery notification
Warns when a battery is not available to provide backup power.
Network manageable
Provides remote power management of the UPS over the network.
Audible alarms
Actively let you know if the unit is on battery, if the battery is low or if there is an overload condition.
Serial connectivity
Provides management of the UPS via a serial port.
Hot-swappable batteries
Ensure clean, uninterrupted power to protected equipment while batteries are being replaced.
Predictive failure notification
Provides early-warning fault analysis ensuring proactive component replacement.
Resettable circuit breakers
Enable a quick recovery from overload events.
Battery failure notification
Provides early-warning fault analysis on batteries enabling timely preventive maintenance.